Installation Procedures
7. When the Hardware Update Wizard box appears, choose “Install from a list or specific location
(Advanced)” and click “Next>.”
8. From the next window, select "Don’t search, I will choose the driver to install”. Click "Next >" to
proceed.
9. When prompted to select a device driver, click “Have Disk”.
10. Next, you’ll be asked to insert the manufacturer’s installation disk into the drive selected (the
default is A:\) – type “C:\Lynx” in the text box, and click “OK”.
AES16e User Manual
Page 13
To Next Page
Loading...
Need help?
General
