Lynx Mixer Reference
6.2 Adapter Window
Windows
OSX
q Sample Clock Section
This section of the mixer provides control of the system sample clock generator. All AES16e audio devices
on a single card MUST have identical sample rates since there is one on-board generator. Sample rates
cannot be changed while AES16e is playing or recording – unless the “Allow Clock Change if Active”
option is selected from the Lynx Mixer Settings > Advanced menu (Windows Only).
Current Source
This displays the clock source that is active. This may differ from the selection in the “Preferred Clock
Source” section, if an invalid or offline clock source was selected there.
AES16e User Manual
Page 38
To Next Page
Loading...