10
Drawers
IMPORTANT NOTE: Interior louver openings and fan
guard openings should never be obstructed to achieve
maximum performance.
IMPORTANT NOTE: All shelving is inter-changeable
with all products.
Drawers
Full-extension Drawers – Pull the drawer out to its far-
thest point. Locate the tabs in the middle on both sides of
the extenders. Press the left tab up and the right tab down;
pull shelf out.
Move each extender separately. Hold the middle of one
extender, pull the front up then move extender ½-inch to
the inside of unit. Pull up then pull out. Place extender at
desired height, place rear standoff screw into rear pilaster,
slide back. Place front standoff screw into front pilaster,
slide down.
To return drawer, first push both extenders completely in
then line up the shelf grooves and slide easily into the unit.
CAUTION completely empty the drawer before
removing
To Next Page
Loading...
Need help?
General
