Ensure that you are using
supplied by Lynx and
supplied by Lynx and
supplied by Lynx and
supplied by Lynx and
supplied by Lynx and
ensure that you do not have
more than one regulator in
Ensure that the supply line is
Ensure that the supply line is
Ensure that the supply line is
atural gas pressure should
atural gas pressure should
atural gas pressure should
atural gas pressure should
atural gas pressure should
. pressure under full load
. pressure under full load
(with all burners on.)
. pressure under full load
oing so will interfere with
oing so will interfere with
oing so will interfere with
Ensure that you’ve preheated
Ensure that you’ve preheated
the main burners for at
Ensure that you’ve preheated
lation is critical. A grill that is
lation is critical. A grill that is
out of level will cause erratic
lation is critical. A grill that is
out of level will cause erratic
lation is critical. A grill that is
burner combustion and inef
carpenter’s spirit level should
be used to level the grill both
carpenter’s spirit level should
be used to level the grill both
carpenter’s spirit level should
be used to level the grill both
be used to level the grill both
ake sure that the regulator
& hose assembly is the one
designed for and supplied
& hose assembly is the one
designed for and supplied
& hose assembly is the one
with your Lynx grill and that
designed for and supplied
with your Lynx grill and that
designed for and supplied
burners indicates a lack of air.
burners indicates a lack of air.
But, if the air around the grill
is dusty or if heavy grease is
But, if the air around the grill
is dusty or if heavy grease is
But, if the air around the grill
present, some orange tips on
present, some orange tips on
present, some orange tips on
adjust the air shutter.
adjust the air shutter.
adjust the air shutter.
adjust the air shutter.
further details.)
it is correctly set up for the
type of fuel you are using.
it is correctly set up for the
type of fuel you are using.
it is correctly set up for the
provided by Lynx must be
provided by Lynx must be
physical pressure being
applied to the regulator
physical pressure being
attached to the back of the
applied to the regulator
attached to the back of the
applied to the regulator
grill. The regulator contains
grill. The regulator contains
grill. The regulator contains
should not be allowed to
touch the grill body or its
Ensure that the burners and
drip tray are clean and free
drip tray are clean and free
from obstructions.
drip tray are clean and free
to run the burners at high
to run the burners at high
Improper lighting proce
dures may have activated
Improper lighting proce
dures may have activated
dures may have activated
device, reducing the heat
To reset the ow control:
very slowly, reopen the
cylinder valve.
very slowly, reopen the
Wind hitting the grill while in
use, especially winds blowing
into or across the hood gap
use, especially winds blowing
into or across the hood gap
use, especially winds blowing
from behind, can cause poor
into or across the hood gap
from behind, can cause poor
into or across the hood gap
from behind, can cause poor
performance and in some
from behind, can cause poor
cases can cause the control
performance and in some
cases can cause the control
performance and in some
panel to get dangerously hot.
prevent
the normal
prevent
winds and avoid grilling in
from prevailing
winds and avoid grilling in
from prevailing
panel to get dangerously hot.
Locate your
from prevailing
Locate your
panel to get dangerously hot.
To Next Page
Loading...
Need help?
General
