LYSON W200700 - Page 16

module due to electrostatic
discharges.
3
Vcpu
[V]
OK /
ERROR
Indication ERROR means that the
measured controller module supply
voltage exceeded the permissible
range. Such a situation means a
failure or overloading of a 5V
feeder, controller’s failure or
damaging a cable connection
feeder <> controller.
4
Vbus
[V]
OK /
ERROR
Indication ERROR means that the
voltage measured on the data
transmission connection to the
inverter exceeded the permissible
range. Such a situation may
indicate an inverter failure,
controller failure or a gap in the
cable connection inverter <>
controller.
5
TEM
P [
o
C]
OK /
ERROR
Indication ERROR means that the
temperature measured inside the
controller’s casing exceeded the
permissible range 5
o
C to 60
o
C.
This may be caused by inverter
overloading, extractor’s operation
within temperatures exceeding the
permissible range..
6
STAT
US
OK / ----
7
↑
OK /
ERROR
Indication ERROR means the
detection of the button having been
pressed – directly after the power
supply has got connected. If such a
situation has not been a deliberate
user’s action, one may suspect a
button damage – e.g. pressing and
blocking caused by excessive
pressing force
8
↓
OK /
ERROR
Description – see above.
9
→
OK /
ERROR
Description – see above.
10
←
OK /
ERROR
Description – see above.
11
PLUS
OK /
ERROR
Description – see above.
12
MINU
S
OK /
ERROR
Description – see above.
13
STAR
T
OK /
ERROR
Description – see above.
14
STO
P
OK /
ERROR
Description – see above.
Technical parameters
CONTROLLER’S TECHNICAL PARAMETERS
STEROWNIKA
The number of manual
modes:
2 - spinning R/L
Setting range for manual
cycle duration:
15 – 900 seconds or ∞
Time regulation step in
manual cycle:
15 seconds
Speed regulation range in
manual cycle:
10% - 100%, step 5%
The number of automatic
modes (cycles):
8
The number of steps in a
cycle:
7
Range of setting the
automatic cycle duration:
60 - 960 seconds (16
minutes)
The step of time regulation
in automatic cycle:
5 seconds
The range of sped
regulation in automatic
cycle:
10% - 100%, step 5%
Display:
4,3” TFT, LED backlighting,
resolution 480x272
The number of languages
served:
32
keypad:
8 buttons
Power supply:
230V
Protection:
10A
Environmental conditions
Temperature inside the
controller under operation:
5
o
C…60
o
C
Ambient temperature for
the controller in storage:
1
o
C…60
o
C
Air humidity for the
controller under operation:
Max 65% at 25
o
C