Lyte Cube480 - Airplay on iOS and macOS

16
Connecting (Cont.)
Airplay on iOS device
There are two ways to use the iOS Airplay function: through the Wi-Fi
network and via Personal Hotspot.
Use Airplay via Wi-Fi network
• Make sure your iOS device and the projector are connected to the
same Wi-Fi network.
• On the projector, enter the Airplay app by clicking on the ‘iOS
Cast’ icon on the home page, then select iPhone.
• On the iOS device (iPhone, iPad), slide up from the home screen
to display the menu, and select Screen Mirroring. In the pop-up
menu, select ‘CUBE480’ and the screen will be mirrored to the
projector.
Use Airplay via Personal Hotspot
• On the iOS device (iPhone or iPad), turn on Personal Hotspot in
the settings menu.
• On the projector, enter the Wi-Fi settings menu and connect to the
Wi-Fi shared by the Personal Hotspot.
• On the iOS device (iPhone or iPad), slide up from the home screen
to display the menu, and select Screen Mirroring. In the pop up
menu, select “CUBE480” and the screen will be mirrored to the
projector.