© 2016 Lytx, Inc. – Confidential & Proprietary 24
DC3P Event Recorder Installation Complete
The DC3P event recorder is installed and ready to use.
Finalize all electrical connections. Use cable-ties to bundle and secure all wires so they don’t
come loose.
Replace any trim pieces on the door pillar and dash that were removed.
Make sure the cable is routed under the trim and cannot get pinched in the door jam or any
moving parts.
Reaffirm you have taken the appropriate safety precautions while working around vehicle
airbags.
Keep the Torx wrench and this guide in a safe place for future use.
To Next Page
Loading...