45
SYSTEM Model Radios
1. With scan operation turned off, select the
desired group to delete from the selected
trunked system's group scan list.
2. Press 9. The current status of the group is
displayed for a time-out period.
3. While the status is displayed, press 9 to
delete the group from the scan list.
, or
turns off. Any group that is not in a trunked
system group scan list will show a "blank" for the
time out period when it is the selected channel.
Nuisance Delete
A group can also be deleted from the scan list, if
it is not the currently selected group, by pressing
A key (SCAN Model) or 9 key (System
Models) during scan operation while the radio is
displaying the unwanted group. The group will be
deleted from the system's group scan list in the
same manner as if done using the steps above.
Deletions done in this manner will not remain deleted
if the radio is turned off and then back on.
To Next Page
Loading...
