79
DATA ON
Displayed for two seconds on top line
of display when the radio is toggled to
the data enabled state.
DATA OFF OPERATION
The radio can be placed in the data disabled
state by any of the following methods. When the data
state is disabled, the display shows "DATA OFF" on
the top line.
•
Declaring an emergency (not to be used unless
an actual emergency condition exists). Alert tone
will sound.
•
Pressing the OPTION button (if pre-programmed
for no data key). Alert tone will sound.
•
Pressing the no data (ND) key (pre-
programmed).
DATA ON OPERATION
The data state is enabled by one of the following
(depending on how it was disabled). "DATA ON" will
be displayed on the top line in the display for two
seconds then the display returns to normal.
•
Pressing the no data (ND) key toggles data state
on or off.
•
Clearing an emergency but valid only if
emergency caused data off operation.
To Next Page
Loading...
