User Guide ♦ 43
English
Specifications
General
Sample Rate 44.1kHz
Microphone Input
Available Gain
40dB
Input Range -42 to -2dBu (0.01 to 0.6Vrms)
Signal-to-Noise Ratio (min gain) -98dB (a-weighted)
Dynamic Range (min gain) 98dB (a-weighted)
THD+N (min gain) 0.0049% (-86dB), 1kHz, -1dBFS
Frequency response (min gain) +/-0.50dB, 20Hz to 20kHz
Impedance 10kΩ
Instrument Input
Available Gain
30dB
Input Range -28 to +12dBV (0.04 to 4.0Vrms)
Signal-to-Noise Ratio (min gain) -98dB @ 48kHz (a-weighted)
Dynamic Range (min gain) 98dB @ 48kHz (a-weighted)
THD+N (min gain) 0.0079% (-82dB), 1kHz, -1dBFS
Frequency response (min gain) +/-3dB, 20Hz to 20kHz
Impedance 370 kΩ
Line Outputs
Max Output (balanced) +10.2dBu (2.5Vrms)
Max Output (unbalanced) +2.0dBV (1.26Vrms)
Signal-to-Noise Ratio -100dB @ 48kHz (a-weighted)
Dynamic Range 100dB @ 48kHz (a-weighted)
THD+N 0.0024% (-92.5dB), 1kHz, -1dBFS @ 48kHz
Frequency Response +/-0.2dB, 20Hz to 20kHz @ 48kHz+/-0.3dB,
20Hz to 40kHz @ 96kHz
Crosstalk -118dB, 1kHz, channel-to-channel
Impedance (balanced) 300 Ω
Impedance (unbalanced) 150 Ω
Digital Outputs
S/PDIF Output Connector 75 Ω
Headphone Outputs
Max Output -2.0dBV (0.8Vrms) into 32 Ω
Signal-to-Noise Ratio -100dB @ 48kHz (a-weighted)
Dynamic Range 100dB @ 48kHz (a-weighted)
Frequency Response +/-0.2dB, 20Hz to 20kHz @ 48kHz
+/-0.3dB, 20Hz to 40kHz @ 96kHz
Crosstalk -86dB, 1kHz, channel-to-channel
Output Impedance 75 Ω
Working Headphone Impedance
32 to 600 Ω
Physical
Mic Stand Connector Size 5/8” by 27 threads per inch
Mounting Bracket Screw Holes
3.5mm each
Weight
3.54 pounds / 1.6 kilograms
Dimensions 9.84” wide x 6.69” depth x 1.88” height
25 cm wide x 17 cm depth x 4.8 cm height
To Next Page
Loading...
