User Guide ♦ 45
English
System Common messages
Status Second Third Description
1111 0010 0vvvvvvv 0vvvvvvv Song Position Pointer – LS Byte then MS Byte.
Used to remotely set the starting position within Black Box’s filter and drumbeat sequences. Because the
sequences are only two measures, incoming positions above two measures are reduced to give the correct
position within the two measure sequences. For example, if the received number gives a position of bar 55, beat 2
and tick 3, it is automatically changed to bar 1, beat 2 and tick 3. Song Position Pointer messages are not sent out.
System Real Time Messages
Status Description
1111 1000 Timing Clock.
When received, replaces the internal tempo clock. Sent if Main param Send MIDI Clock Enable = 1.
1111 1010 Start.
When received, starts the sequencer from the beginning. Sent when sequencer started. Sent if Main param Send MIDI Clock Enable = 1.
1111 1011 Continue.
When received, starts the sequencer from the current step. This message is not sent.
1111 1100 Stop.
When received, stops the sequencer. Sent when sequencer is started. Sent if Main param Send MIDI Clock Enable = 1.
To Next Page
Loading...
