33
Appendix A - Technical Specs
Analog Audio
Peak Analog Input Signal: +2dBV.
Peak Analog Output Signal: +2dBV (Consumer setting),
-4dBV (-10dBV setting).
Max Converter Data Width: 24 bits.
Dynamic Range:
Outputs: 104dB (a-weighted).
Inputs: 100.4dB (a-weighted).
THD (at 0dBFS): less than 0.002%,
Frequency Response: 22Hz - 22kHz, -0.4,-0.4dB.
Input Impedance: 10k ohms minimum.
Connectors: Gold-plated RCA female, on PCI card.
Digital Audio
Maximum Word Width: 24 bits.
Digital Input Format: S/PDIF coaxial, 0.5V to 5V peak-to-peak.
Digital Input Sample Rate: 8kHz to 96kHz.
Digital Output Format: S/PDIF coaxial, 0.5V peak-to-peak;
AES/EBU data stream over S/PDIF coaxial.
Digital Output Sample Rate: 8kHz to 96kHz.
Connectors: Gold-plated RCA, female, on break-out cable.
MIDI
I/O Configuration: 1-in, 1-out; 16 MIDI channels in and out.
Connectors: Standard MIDI 5-pin DIN on break-out cable.
Adapter Resource Requirements (PC only)
IRQ: One required
I/O Addresses: Four blocks: 32, 16, 16, and 64 bytes
DMA Channels: None required
To Next Page
Loading...
