PCI Adapter Card and Break-Out Cable:
1. Analog INS 1&2: These jacks input analog audio from a variety of external
sources. Each jack is female RCA, compatible with common male RCA cables.
During stereo operation, the IN1 jack (with white-colored insert) is the left audio
channel and IN2 (with red-colored insert) is the right audio channel.
2. Analog OUTS 1&2: These jacks output analog audio to a variety of external
sources. Each jack is female RCA, compatible with common male RCA cables.
During stereo operation, the OUT1 jack (with white-colored insert) is the left
audio channel and OUT2 (with red-colored insert) is the right audio channel.
3. Host Cable connector and Break-Out Cable: This 15-pin D-sub connector
accepts the supplied break-out cable to provide S/PDIF and MIDI connectors.
4. Coaxial S/PDIF Input: This RCA connector receives an S/PDIF stereo signal
from your coaxial S/PDIF digital source such as a DAT, MiniDisc player or
external A/D converter.
5. Coaxial S/PDIF Output: This RCA connector sends an S/PDIF stereo signal to
your coaxial S/PDIF digital target device such as a DAT, MiniDisc player or
external D/A converter. This output is also used as a Dolby Digital 5.1 (AC3)
output for DVD or Home Theatre use.
6. MIDI Input: This 5-pin DIN accepts MIDI data from any external MIDI device,
via a standard MIDI cable. Supports up to 16-channels of MIDI data on a single
cable.
7. MIDI Output: This 5-pin DIN outputs MIDI data to any external MIDI device, via
a standard MIDI cable. Supports up to 16-channels of MIDI data on a single cable.
4
4
1
2
6
7
5
3
To Next Page
Loading...
