Quick Start Guide2 Fast Track Ultra
‣
Compatibility
Windows
Fast Track Ultra is supported under Windows XP with Service Pack 2 or later, or
Windows Vista (32-Bit editions). It is not supported under Windows Media Center
Edition, Windows 2000, Windows 98, 98SE or Windows ME.
Mac
Fast Track Ultra is supported by PowerPC-based Macs running Mac OS X
10.3.9 / 10.4.10 or later, as well as Intel-based Macs running Mac OS X 10.4.10
or later.
Please see the User Guide for specific Minimum System Requirements.
Important Note about Bus Power: Fast Track Ultra can be powered via the
included AC power supply or via bus power from the host computer. However,
when running on bus power, Fast Track Ultra will be limited to four inputs and
four outputs. These are mapped to inputs 1 and 2, outputs 1 and 2, and the
S/PDIF I/O.
Important Note about USB 1.1 Ports: Fast Track Ultra has been designed as
a USB 2.0 device. It may be used with a USB 1.1 port, but will only function as a
2-in/2-out device with sample rates limited to 44.1 and 48kHz. This is due to the
limitations of the USB 1.1 bus bandwidth.
If your computer does not have a native USB 2.0 port, you will see the following
alert during the installation process:
“Because this computer has no USB 2.0 ports,
Fast Track Ultra functionality will be limited.”
Important Note about System Upgrades: Please check the M-Audio driver
download page at http://www.m-audio.com/drivers for
the availability of an
updated driver before you decide to install operating system updates.
Before new M-Audio device drivers are released, they are tested for use with the
operating system versions that are available at that time. When updates for an
operating system are released by Microsoft or Apple, all M-Audio device drivers
have to be re-tested and possibly updated to ensure proper operation.
M-Audio recommends refraining from installing operating system updates until a
driver has been posted to the M-Audio website for that specific operating system.
To Next Page
Loading...
Need help?
General
