Need help?Do you have a question about the M-Audio FireWire Solo and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Connectivity | FireWire |
| Simultaneous I/O | 2x2 |
| A/D Resolution | 24-bit |
| Sample Rate | 44.1 kHz, 48 kHz |
| Bit Depth | 24-bit |
| Microphone Preamps | 1 |
| Phantom Power | Yes |
| Outputs | 2 x 1/4" TRS |
| Headphone Output | 1 x 1/4" TRS |
| Software Included | Ableton Live Lite |
| Inputs | 2 (1 XLR/TRS combo, 1 TRS) |
Lists included items such as the interface, cables, and software CD-ROM.
Provides an overview of the portable audio interface and its key capabilities.
Covers rack mounting options and the minimum operating system and hardware specifications.
Details gain knobs, input selectors, and clip indicators for microphone and guitar inputs.
Explains the output level knob, headphone output jack, and power indicator LED.
Covers AC input, Kensington lock port, and FireWire connectivity ports.
Details the S/PDIF digital I/O and analog line input/output connections.
Important notes before starting installation and the initial steps for driver setup.
Explains the installation wizard process, including potential Windows Logo testing warnings.
Guides on connecting hardware after installation and how Windows detects new hardware.
Details on starting the driver installation process for older Mac OS versions.
Covers license agreement, disk selection, and crucial connection advice for Mac OS.
Details the welcome dialog, read me file, and license acceptance screens for Mac OS.
Covers user authentication, completing the installation, and final hardware connection steps.
Describes connections for microphones, instruments, line sources, and headphones.
Explains the main mixer interface and how to manage mixer settings.
Explains output routing, stereo linking, mute, solo functions, and panning controls.
Settings for audio clocking, buffer size for latency, and sync source selection.
Details how to route S/PDIF output signals, including pass-through options.
Provides details on firmware versions and how to check for software and firmware updates.
Guides for optimizing input signal gain for recording using microphone and line inputs.
Instructions on directing audio signals from inputs to the device's analog or S/PDIF outputs.
Details ASIO direct, ASIO tape-type, and WDM input monitoring capabilities.
Using the control panel for latency-free monitoring of inputs, independent of software.
Explains how to configure the sample rate, either internally or externally.
Steps for troubleshooting problems with no sound or digital input.
Tips for preventing audio artifacts like clipping, pops, and distortion during recording.
Details on product warranty coverage and the process for registering your device.
To Next Page
