8
The Read Me box will appear next. This box contains important information on changes that may have occurred since the writing of this manual,
so be certain to read through it.
You will then be presented with the License Agreement. Click “Continue”, and then click “Agree” if you agree with the License Agreement.
Select a destination disk for the installation, then click “Continue.”
On the Easy Install box, click “Install.”
On the following box, click “Continue Installation.”
You will then see the Connect Device Warning box, instructing you to NOT connect your FireWire Solo until the driver installation is complete and
your computer has been shut down. Click “Okay.”
To Next Page
Loading...
