MidAir Quick Start Guide
|
1
日本語
| Italiano | Español | Deutsch | Français | English
1
|
Quick Installation
Your M-Audio MidAir wireless MIDI system is class compliant. This means that if you are using Windows XP
or Mac OS X, you can simply connect the MidAir receiver to your computer, power up the
computer, MidAir transmitter, and keyboard controller, and you’re ready to go.
No drivers are required.
However, Windows users who intend to use the MidAir wireless MIDI system with more than one application
at the same time should install the special M-Audio drivers for best performance.
2
|
Installation Instructions for Windows XP
PLEASE NOTE: Do not connect the MidAir receiver to your computer until the M-Audio driver files have been
installed. The following instructions will indicate when you should connect the receiver to your computer.
1. If you have already connected the MidAir Receiver to your computer, disconnect it before beginning the
installation.
To Next Page
Loading...
Need help?
General
