The installer will scan your hard drive (this can take some time) and will then
install the necessary files and perform setup actions on your system.A series of
progress bars will show you how the process is going.
6. At the next prompt, the installer will warn you that this product does not
have a Windows Digital Signature.Click “Yes” to continue.
7. A dialog box will appear, stating that the installation has succeeded. Click
“Finish” to complete the driver installation.
8. Plug the Oxygen 8 into your computer’s USB port.Be sure to either have the
power supply connected and power switch set to 9V, or if not using power
supply, be sure to set the power switch to USB Power. Upon doing so, the
computer will find and install the necessary drivers.
9. The installer will warn you that this product does not have a Windows Digital
Signature.Click “Yes” to continue.
8
To Next Page
Loading...
Need help?
General
