M-Audio ProjectMix I/O User Manual

ProjectMix I/O User Guide
37
Locate Buttons (t LOCATE u)
The LOCATE (t / u) buttons move the transport to the previous or next assigned marker.
Set Button (SET)
SET activates and deactivates Punch In mode.
In Button (IN)
The IN button sets the Punch In point.
Out Button (OUT)
The OUT buttons sets the Punch Out point.
Window Button (WINDOW)
Pressing the WINDOW button repeatedly cycles through all open windows.
Zoom Button (ZOOM)
The ZOOM button works in conjunction with the arrow buttons (t, p, u, q). Press the ZOOM button repeatedly to toggle through three
different modes:
Scroll Mode (ZOOM button LED not lit) – left/right arrow buttons (t, u) scroll the transport.
Zoom Mode (ZOOM button LED lit) – left/right arrow buttons (
t, u) zoom the display.
Nudge Mode (ZOOM button LED blinking) – left/right arrow buttons (t, u) nudge selected part(s).
Arrow Buttons (t, p, u, q)
The arrow buttons (t, p, u, q) perform multiple functions depending on the mode selected, as referenced throughout this section.
Scrub Button (SCRUB):
Press the SCRUB button to engage the jog wheel to scrub the selected audio waveform. If no audio is selected, the jog wheel scrolls the
transport as usual.
Jog Wheel:
Scrolls the transport.
ALT + REW:
Press ALT & REW together to return the transport to Zero (RTZ).
Digital Performer Mode

M-Audio ProjectMix I/O Specifications

General

Brand	M-Audio
Model	ProjectMix I/O
Category	Recording Equipment
Language	English