89
IDM 510-067-1
K12-R sealing unit
English languageOperation and maintenance manual
Cutting blade cleaning
The gure shows the points of intervention and the description shows the proce-
dures to be adopted.
– The intervention must be carried
out with the machine stopped in
safety conditions.
en
on
Warning
Wear the suitable personal protective
equipment (gloves) to avoid any cut-
ting hazard.
1. Lift guard A and keep it in position by
means of lever B.
2. Clean blade C from glue residues.
We recommend the using solvent , to
remove glue residue.
3. Spread a thin layer of lubricant on
blade C in order to avoid the accu-
mulation of glue residues.
4. Release lever B.
– Guard A returns to its position.
5. Repeat the operation on the other
equal component.
To Next Page
Loading...
Need help?
General