EasyManua.ls Logo

M-tech MT-500 - TRANSMITTER; RECEIVER

M-tech MT-500
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MT-500 59
TRANSMITTER
Power Output: 25 Watts or 1 Watt switchable.
Tx Current: 6 Amps @ 25W Tx.
1 Amp @ 1W Tx.
Modulation: G3E for Voice, G3B for DSC Data.
Transmit Frequencies: 156.025Mhz - 157.425Mhz @ 25Khz spac-
ing.
Spurious/Harmonic Emissions: Less than 0.25µW.
Modulation Distortion: Less than 4% @ 1Khz for +/-3Khz devia-
tion.
Modulation Limiter: +/-5Khz deviation with 100% modulation.
Frequency Response: Matches +6dB/Octave slope within
+1/-3dB from 300 to 2500Hz.
18dB/Octave beyond 3000Hz. Audio Low
Pass Filter is included.
Hum & Noise: Less than -40dB.
RECEIVER
Receive Frequencies: 156.300Mhz - 162.000Mhz @ 25Khz spac-
ing.
Sensitivity: 0.5µV or less for 20dB SINAD
Squelch Range: 0.25µV to 0.80µV @ full squelch
Audio Output Power: 3.0W minimum @ 4 Ohms with less than
10% distortion.
Receiver Current: 200mA in Standby ( 2 receivers)
Modulation Acceptance: +/-7 kHz minimum.
Adjacent Channel Selectivity: Less than -70dB for +/-25Khz.
Image Rejection: Less than -70dB.
Intermodulation Spurious
Response: Less than -70dB.
Noise Level: Less than -40dB unsquelched.
Audio Frequency Response: Matches -6dB/Octave slope within
+1/-3dB from 300 to 2500Hz, 18dB/Octave
over 3000Hz.

Table of Contents