MT-700 61
To make a Position Request:
•
Press the
key. The DSC calling menu appears in the display with the
cursor indicating
INDIVIDUAL
topic.
•
Push the
SELECT/ENT
knob or press the
key. The
INDIVIDUAL
menu
appears in the display.
•
Use the
SELECT/ENT
knob to select the
DIRECTORY
topic.
INT
INDIVIDUAL
>DIRECTORY
MANUAL
DSC Directory
•
Push the
SELECT/ENT
knob or press the
key. The directory list appears
in the display.
•
Use the
SELECT/ENT
knob to select the desired vessel name.
Note: The MMSID’s for each entry do not appear in the list.
•
Press the
key. The
INDIVIDUAL
call screen appears in the display.
INT
INDIVIDUAL
vessel name
>ROUTINE
PRESS CALL.
Individual Call Screen
•
Use the
SELECT/ENT
knob to select
REQ POS
.
INT
INDIVIDUAL
vessel name
>REQ POS
PRESS CALL.
Position Request Screen
•
Press the
key to send the call. Call is made on channel 70. If you
To Next Page
Loading...