MT-700 73
10.4 Specifications
MT-700 Technical Specifications
GENERAL
Compliance: Meets EU specification EN301-025 V1.3.1 (February
2007), Radio Regulations Appendix 18, and DSC Class
D.
Number of Channels: All available INT’L (per Appendix 18). Externally
FLASH programmable for various Country
Requirements.
Vdc Input: 13.6 Vdc.
Size (W x H x D): 177.2mm x 91.2mm x 226.8mm. Heat sink is included.
Not bracket.
Weight: 1.8Kg with MIC.
Waterproofness: JIS-7
Antenna: 50 OHM impedance with SO239 Connector.
Transmitter operates 5 minutes into OPEN or SHORT.
Temperature Range: -15 Degrees C to +55 Degrees C
Construction: UV Stable Case with Backlighted silicon rubber keypad.
Die Cast Rear Heat sink.
LCD Display: 4 Lines with 11 characters each and BOLD channel
number display with 3 discrete annunciators. Silver
background with dark Black letters and Bright Orange
display backlighting. LCD has dimmable ORANGE
display/keypad backlighting. Contrast control
provides best viewing angle. Viewing area is 620mm x
230mm.
Speaker: Sealed Water Resistant Polypropylene.
Microphone: Special styled MIC with 12 Alpha Numeric keys. MIC
editing works simultaneously with Code Wheel and
allows discrete channel entry.
Channel/Selection Changing: 2 bit Code Wheel.
To Next Page
Loading...