MT-700 75
memory.
Memory Scan Channels: Unlimited with instant editing and can be cleared on
Power-up. The Memory Channel list is presented in a
Page Mode format with instant ADD/DELETE
function.
Alarm Tones: 3 different tone sequences are provided.
Frequency Control Method: Phased Locked Loop (PLL).
Frequency Stability: +/-5 PPM for both the Transmitter/Receiver.
GPS/NMEA: $GPGGL/GGA/RMC/GNS sentence is decoded.
NMEA Checksum can be turned Off/On.
GPS Display: Data is selected from following:
•
Date & local time & LL Position (3 digit for
seconds).
•
SOG/COG& LL Position (3 digit for seconds).
•
Time & Manual LL Position (2 digit for seconds).
•
No Data.
Data Output: LL Position from another vessel can be transferred to
the DSC equipped chart plotter, if it is connected.
Special Functions: Three scanning Modes:
•
All Scan
•
Memory Scan (nonvolatile)
•
Priority Scan
Noisy channels can be temporarily deleted in All Scan
Mode.
Automatic Auto Calendar for clock.
Manual Entry of LL & Time for DSC Emergency
Calling.
Local Time Offset values can be entered in 30 minute
intervals.
Instant Access to “Last DSC Call”.
To Next Page
Loading...