M-VAVE BLACKBOX - Delay Module

7.Autolter
● Speed
● Min
● Max
● Mix
● Feedback
Ⅳ：Delay Module
1.Analog, it is the delay eect of the signal of the analog tube, and
the timbre has the characteristics of retro and warm.
● Time, adjust the feedback speed of echo repeats, 600-60bpm.
● Feedback, the feedback times of echo repeats.
● Mix, Adjust the d and wet ratio.
● Phaser, the Phaser eect is increased in the Delay wet sound. This
parameter can adjust the amount of Phaser used.
● Frequency, this parameter adjusts the speed and frequency of the
Phaser.
2.Ducking Delay, When we process the delayed wet sound, we add
the Noise Gate to the pa before the wet sound. Thus, the front pa
of the wet sound is suppressed to achieve a front evasive eect, and
the sound is gradually increased, the dynamics of the delay are more
‘felt’ than ‘heard’.
● Time, adjust the feedback speed of echo repeats, 600-60bpm.
● Feedback, the feedback times of echo repeats.
● Mix, Adjust the d and wet ratio.
● Unpack, After this parameter is turned up, the sudden rise in the
volume of the wet rear pa can be unpacked, so as to achieve a
smoother delay dynamic.
● Speed, the Chorus eect is increased in the Delay wet sound. This
parameter can adjust the speed of Chorus used.
● Depth, this parameter adjusts the depth of the Chorus.
3, dTape, Tape delay, it replicates the unique delay style of tape
machine, you can not only get the warmth and silky of professional
grade tape machine, but also simulate the sound eects of tape in
real situations such as CRINKLE, BIAS, and so on.
9