Installation Precautions
Use the TOP in an environment that meets the general specification contained
in this manual or datasheet.
Using the TOP in an environment outside the range of the general specifications
could result in electric shock, fire, erroneous operation, and damage to o
deterioration of the product.
Completely turn off the power supply before loading or unloading the module.
Not doing so could result in electric shock or damage to the product.
Make sure all modules of TOP are loaded correctly and securely.
Not doing so could cause a malfunction, failure or drop.
When install the TOP in environment of much vibration, be sure to insulate the
TOP from direct vibration.
Not doing so could cause electric shock, fire, and erroneous operation.
Be sure to there are no foreign substances such as conductive debris inside
Caution
Wiring Precautions
Completely turn off the external power supply when installing or placing wiring.
Not doing so could cause electric shock or damage to the product.
Make sure that wires are correctly connected to terminals.
Incorrect connection could result in electric shock or dama
roduct.
Warning
Be sure that wiring is done correctly be checking the product’s rated voltage and
the terminal layout. Incorrect wiring could result in fire, damage, or erroneous operation
Tighten the terminal screws with the specified torque.
If the terminal screws are loose, it could result in short circuits, fire, or erroneous
operation.
Be sure to ground the FG or (LG) terminal to the protective ground conductor.
Not doing so could result in erroneous operation.
Be sure there are no foreign substances such as sawdust or wiring debris inside
the module. Such debris could cause fire, damage, or erroneous operation
.
Caution
To Next Page
Loading...
Need help?
General