YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014
Copyright © 2014, M2Tech Srl
71
www.m2tech.biz
Here the user must select “YoungDSD UAC2” as predefined device (as it’s already
been done in the case shown in Fig. 45). From that moment on, every sound
produced by Windows or any application which relies on Windows to deliver its sound
will be sent to the YOUNG DSD.
It is also possible to tell the operating system which sampling frequency and
resolution are to be used to operate the YOUNG DSD. To this purpose, it is sufficient to
click on the “Properties” button, thus opening the window shown in Fig. 46.
Figure 46
To Next Page
Loading...
