Need help?Do you have a question about the M2TECH NASH and is the answer not in the manual?
Gain| MM gain | 55dB, 60dB, 65dB |
|---|---|
| MC preamp gain | 3dB to 30dB |
| MC total gain | 58dB to 95dB |
Input Characteristics| MM input resistance | 15 kOhms or 47 kOhms |
|---|---|
| MM input capacitance | 0, 100, 220, 320, 470, 570, 690, 790 pF |
| MC input resistance | 10 Ohms to 1000 Ohms |
Output Characteristics| Output level | 2.5Vrms |
|---|---|
| SNR (MM) | 90dBA |
| SNR (MC) | 80dBA |
Audio Performance| THD+N | 0.005% (2.8Vrms out) |
|---|---|
| Frequency response | RIAA +/- 0.5dB (20Hz-20kHz) |
Power| Supply voltage | 15VDC |
|---|---|
| Power consumption | 5W |
| External supply voltage | +15V/-15V/+5V |
Weight and Dimensions| Size | 200x50x200mm (w x h x d) |
|---|---|
| Weight | 2.0kg |
| Packed weight | 2.4kg |
Controls power, menu exit, and standby functions.
Adjusts MC stage gain (3dB to 30dB).
Sets MC stage input impedance (10-1000 Ohms).
Configures MM input resistance and capacitance.
Connect turntables and other audio sources to dedicated inputs.
Connects the stock wall adaptor or external power supply.
How to choose between different connected audio sources.
Accessing and navigating the device's configuration menu.
Details NASH behavior based on power mode switch and menu setting.
Uses DIP-switches to set MM input resistance and capacitance values.
To Next Page
