Need help?Do you have a question about the M2TECH YOUNG and is the answer not in the manual?
Audio Specifications| sampling frequencies | 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz |
|---|---|
| resolution | 16 to 32 bits |
| THD+N | 0.0003% (1kHz @ 0dBFS, 0-22kHz) |
| S/N ratio | 122dB (A-weighted) |
Input Specifications| S/PDIF input sensitivity | 0.5Vpp +/-0.1V |
|---|---|
| S/PDIF input impedance | 75 Ohms |
| AES/EBU input sensitivity | 2Vpp +/- 0.5V |
| AES/EBU input impedance | 110 Ohms |
Output Specifications| analog output voltage | 2.65Vrms @ 0dBFS |
|---|
Power| supply voltage | 15 to 18VDC (20VDC max) |
|---|---|
| power consumption | 240mA @ 15V (no output loaded) |
USB and Clock Specifications| USB | 2.0 high speed |
|---|---|
| clock precision | +/-10ppm 0 to 60°C, 2ppm typical @ 25°C |
Weight and Dimensions| size (cabinet) | 200x50x200mm (w x h x d) |
|---|---|
| size (with connectors and feet) | 200x55x210mm (w x h x d) |
| size (box) | 360x120x260mm (w x h x d) |
| weight (DAC only) | 1.7kg |
| weight (box) | 3kg |
Unauthorized modifications can invalidate CE compliance and cause the unit to be unsuitable for use.
Instructions on where and how to download the necessary drivers from the M2Tech website.
Guide for installing the driver on a Windows PC, including creating a temporary folder.
Steps for performing an automatic driver installation on Windows, including handling the wizard.
Instructions for manually installing the driver on a Windows PC using setup utilities.
Guide to configuring the YOUNG DAC on Windows Vista and Windows 7 using DS, KS, or WASAPI.
To Next Page
