M2TECH YOUNG - 5.3. Installing the Driver on a Mac

YOUNG
384 k H z /32bit digital-TO-ANALOG CONVERTER
REVISION 1.o – NOVEMBER 2010
Copyright © 2010, M2Tech Snc di Manunta & Marino
12
M2Tech
www.m2tech.biz
5.3. Installing the driver on a Mac
Double-click on the zip file to open it. It contains a single dmg file. Extract it from the zip
and double-click on it to open it. It only contains a pkg file. Double click on it to start driver
installation. The window shown in figure 7 will appear.
Figure 7
Click on the Continue button. The installation process will go on and the window in figure 8
will appear.
Figure 8