MA LIGHTCOMMANDER II 24/6 - 6.7.2 Modifying X-Fade Steps

Lightcommander 24/6 - 48/6Lightcommander 24/6 - 48/6
Lightcommander 24/6 - 48/6Lightcommander 24/6 - 48/6
Lightcommander 24/6 - 48/6
eMail: info@malighting.de
.
Tel.: +49 931 497940
.
User's Manual Lightcommander 24/6 - 48/6
3131
3131
31
CHASE -- STEP 06
A5
A6
47
48
41
42
35
36
29
30
23
24
17
18
11
12
05
06
-
-
-
-
-
-
-
-
-
-
-
-
-
-
03
-
-
-
Modifying REAL LEVEL steps:
6.7.2 Modifying X-Fade Steps
By using PREVIEW - X-FADE the intensity of the single channels can
be modified for any of the steps.
Modifying MEMORY steps:
A5
A6
47
48
41
42
35
36
29
30
23
24
17
18
11
12
05
06
-
-
-
-
-
-
-
-
-
-
-
-
-
-
03
-
-
-
MODIFY MEM 3 A STEP 03 CHASE --
Modifying ON/OFF steps:
ON/OFF steps are displayed by a display graphic and on the channel
LED´s. Modifications can be done using the channel flash buttons.
P R E V I E W CHASE IN MEMORY
STEP 07
USE CHANNEL - BUTTONS TO MODIFY STEP
channel 25-48
s. WIDE
function
As the modification will not only
affect this step, but will change the
stored memory, MODIFY has to be
switched on first. Modifying works
like on LEVEL steps.
As long as the MEM... button is
held down, the memory can be
substituted by another memory
number.
AUX 1-6
Channels, selected by their buttons, can be modified via the encoder or
preset 2 faders may be used in Grap Mode.
channel
1-24
Selecting the step by
pressing the STEP button
and selecting the step via
encoder