Need help?Do you have a question about the MAAX Spas Powerpool and is the answer not in the manual?
Guidelines for selecting an appropriate location and ensuring proper placement for installation.
Considerations for installing the PowerPool™ outdoors, including local codes and environmental factors.
Key considerations for installing the PowerPool™ indoors, focusing on humidity and floor support.
Details on MAAX®-Force jets designed for swimming, providing adjustable water flow for exercise.
Information on individually engineered jets for hydro-massage, including types and adjustability.
Instructions on how to clean jets to remove mineral buildup and ensure free movement.
Requirements for connecting the spa to a GFCI-protected circuit as per national codes.
Describes options for bringing conduit to the equipment compartment and drilling requirements.
Details on connecting the spa to a 240-volt electric service, including requirements.
Steps to bleed air from the system when filling the PowerPool™ for the first time or after draining.
Overview of the control panel functions for the swim zone of the SuperSport model.
Overview of the control panel functions for the spa zone of the SuperSport model.
Explanation of the touchpad buttons on the control panel and their functions for programming the spa.
Information on setting and adjusting the water temperature, including maximum and minimum limits.
How to activate the primary filtration and jet pump and sequence of jet action.
How to activate jet pumps 2 and 3 and sequence of jet action.
How to lock the set temperature to prevent unauthorized adjustments.
How to unlock the temperature setting to allow adjustments.
How to engage the panel locking system to prevent unauthorized use of the control system.
How to disengage the panel locking system.
Instructions on how to turn the digital lighting system on and off.
Explanation of the three primary operating modes: Standard, Economy, and Sleep.
Steps to change the operating mode of the PowerPool™ control system.
How to set the time and establish filtration cycles for optimal operation.
Step-by-step guide to setting the current time of day on the control panel.
Description of the default filter cycle times and how they operate.
Instructions on how to adjust the start time and duration of filter cycles.
How to run a clean-up cycle using the jets for system maintenance.
How to invert the LCD display for easier viewing.
Information about the Digital Optic Lighting System and its color settings.
How to change the color sequence modes for the digital lighting system.
Explanation of the CleanZone™ ozone water treatment system and its operation.
Information on the CleanZone II™ ultra-violet water treatment system.
Details on the optional audio system and its usage.
Explanation of the automatic time-out feature designed to protect equipment and users.
Table detailing common LCD messages, their causes, and corrective actions.
Importance of water chemistry, sanitizers, and pH balance for spa operation and user comfort.
Methods for sanitizing water, including chlorine, bromine, and ozone, and maintaining residuals.
Importance of maintaining proper pH balance for sanitizer effectiveness and equipment protection.
Guidance on establishing a sanitizing program using ozone, considering usage and water chemistry.
Notes on the use of specialty chemicals and monitoring during heavy usage.
Instructions on how to safely drain the PowerPool™ and recommendations for frequency.
Guidelines for inspecting, cleaning, and replacing filter cartridges to maintain water quality and performance.
Steps and precautions for winterizing the PowerPool™ to prevent freeze damage in cold climates.
Instructions for cleaning and maintaining the PowerPool™ cabinet made of Duramaax™.
How to clean and care for the acrylic shell surface to keep it looking new.
Steps for servicing and replacing the underwater LED light assemblies.
To Next Page
General