32
Inversion Feature
The 760 Series Control includes an
Inversion
feature that makes it easy to read the LCD from inside
or outside the spa. To invert the LCD display, touch
the Invert pad. Repeat the sequence to reverse the
inversion process.
Auxiliary Panel
Select models are equipped with an auxiliary
control panel which allows you to operate all three
pumps and the internal light without leaving the
comfort of the Full-Body Massage Seat ™.
JETS 1
Touch the
JETS 1
pad to activate the primary
filtration pump. The sequence of the jet action is:
1 touch = Low whirlpool jets
2 touches = High whirlpool jets
3 touches = Off
JETS 2
Touch the
JETS 2
pad to activate the second
therapy pump. The sequence of jet action is:
1 touch = Low therapy jets
2 touches = Off
JETS 3
Touch the
JETS 3
pad to activate the third
therapy pump. The sequence of jet action is:
1 touch = Low therapy jets
2 touches = Off
AIR
Touch the
AIR
pad to activate the blower.
The sequence of the blower is:
1 touch = On
2 touches = Off