To Next PageTo Next Page
Need help?Do you have a question about the MAAX 300 Series and is the answer not in the manual?
Explains the necessity of the GFCI trip test for proper spa function.
Describes what to expect when the GFCI breaker trips during the test.
Addresses consequences if the GFCI breaker does not trip correctly.
Highlights GFCI as a safety device and directs to manual sections.
Consolidates various safety warnings for using the spa, covering supervision, entrapment, and health.
Emphasizes grounding, wire gauge, and placement relative to metal surfaces for electrical safety.
Details temperature limits, risks for pregnant women, and medication effects on spa use.
Details requirements for avoiding electrical shock and ensuring code compliance.
Lists recommended actions for maintaining the spa and its water quality.
Lists actions to avoid during spa use to prevent damage or injury.
Explains the causes, symptoms, and effects of hyperthermia in spas.
Details electrical codes and disconnecting means for spa installation.
Covers foundation, level surface, and accessibility for proper spa installation.
Lists environmental and logistical factors for outdoor spa placement.
Lists factors for indoor spa placement, including humidity and floor requirements.
Describes the filter's role in debris removal and water return.
Explains its use for settings like temperature and pump control.
Details how air controls modify jet intensity.
Identifies the location of pumps, heater, and electrical controls.
Describes drain faucets and digital/fiber optic lighting.
Explains its purpose for warranty and electrical information.
Describes its use for controlling jets or stereo functions.
Explains low and high speed operation for circulation and jet action.
Explains its use for shutting off water flow during servicing.
Describes input wiring and the heater's safety features.
Lists optional equipment available for the spa system.
Describes Directional, Rotating, and Euro jets and their characteristics.
Details cleaning and replacing spa jets to ensure free movement.
Explains how air controls adjust jet intensity and valve operations.
Covers general safety, requirements, and GFCI protection.
Discusses wiring requirements, knockouts, and ampere needs.
Explains the necessity of GFCI protection and its compliance.
Details the 4-wire service, conductor size, and grounding for 240V installations.
Explains codes for various spa electrical configurations.
Describes two modes for heater operation with pumps.
Maps models to specific electrical requirements.
Continues the model-specific electrical requirement mapping.
Maps models with blowers to electrical requirements.
Continues the model-specific electrical requirement mapping.
Lists electrical requirements for convertible units without GFCI.
Lists electrical requirements for convertible units with GFCI.
Details electrical requirements after converting GFCI cord units.
Guides on filling the spa, water level, and chemical addition.
Explains the process of bleeding air from the system.
Describes the system's initial priming mode and its duration.
Describes the appearance and basic features of the 300 control panel.
Explains the buttons and their uses for spa control.
Details how to increase or decrease the set temperature.
Explains the timed operation of Pump 1 for therapy and filtration.
Describes the different modes and their effects on heating and pump operation.
Explains the default filter cycles and recommended total filter time.
Describes how to adjust the start time of filter cycles.
Details how to set the duration for filter cycles.
Explains how to turn the spa light on and off.
Shows images of the 501 control panel and lists its features.
Describes basic operation and settings for the 501 control system.
Explains the functions of each button on the 501 control panel.
Details how to set and adjust the spa's temperature.
Explains how to activate Pump 1 for jet massage.
Describes the functionality of each operating mode.
Covers setting filter cycle start times and durations.
Details how to set filter cycle durations from 2 to continuous hours.
Shows the layout and features of the 504 control panel.
Describes basic operation and settings for the 504 control system.
Explains the functions of each button on the 504 control panel.
Details temperature adjustment and related operational notes.
Explains how to operate the primary and therapy pumps.
Explains how to turn the spa light on and off.
Describes the functionality of each operating mode.
Describes how to switch between operating modes.
Introduces the process of establishing filtration cycles.
Explains how to set the start time for filtration cycles.
Details setting the duration for filter cycles.
Explains how to initiate a manual clean-up cycle.
Safety guidelines for using electronic devices with the spa.
Further safety advice for using electronic devices near the spa.
Details the purpose of each button on the TP600 control panel.
Explains how to navigate through the control panel menus.
Guides on filling the spa, opening valves, and preparing for operation.
Details the priming mode and how to start pumps.
Steps for starting pumps and ensuring they prime correctly.
Explains pump activation, speeds, and automatic shut-off times.
Describes the continuous operation of the circulation pump.
Explains how filtration and ozone work together.
Details how the system protects against freezing.
Explains how to adjust the set temperature.
Describes the use of high and low temperature ranges.
Explains the difference between Ready and Rest modes for heating.
Details how circulation mode affects heating and filtering.
Describes the behavior when switching modes.
Guides on setting the system's clock for proper function.
Explains how to invert the screen for better visibility.
Describes how to restrict access to temperature or all settings.
Provides the specific button sequence to unlock the panel.
Explains setting start times and durations for filtration.
Explains the necessity and process of the GFCI test.
Identifies buttons and their basic functions on the TP800 panel.
Explains the arrow and select buttons for menu navigation.
Describes the data shown on the main screen.
Explains how to move through menus using the buttons.
Details how to access and control spa equipment via the screen.
Explains the simplified interface of the shortcut screen.
Covers features like Temp Range, Heat Mode, and Invert Panel.
Explains setting and using two distinct temperature ranges.
Compares Ready and Rest modes for heating functions.
Describes the behavior of this specific mode.
Outlines the process of filling the spa.
Details the priming mode and how to manually exit it.
Steps for starting pumps and ensuring they prime correctly.
Explains pump behavior, time-outs, and auto-activation.
Describes the operation of the circulation pump.
Details filtration cycles and ozone generator function.
Details how the system protects against freezing.
Explains setting start times and durations for filtration.
Explains how to set up a second, optional filter cycle.
Details how secondary pumps/blowers purge water.
Describes how to restrict access to settings.
Provides the specific button sequence to unlock the panel.
Explains the necessity and process of the GFCI test.
Describes operating pumps and lights from an auxiliary panel.
Explains how to activate the primary filtration pump.
Explains how to activate the second therapy pump.
Introduces the jet sequencer system.
Details how to energize the sequencing system.
Explains how to change the speed of the therapy sequence.
Describes how to pause and resume the sequence.
Presents a chart detailing the jet sequencing programs.
Explains connecting to smart devices via WiFi.
Guides on downloading and installing the WiFi app.
Details steps to connect the smart device to the spa's network.
Explains connecting the spa to a home WiFi network for remote control.
Guides on configuring WiFi settings within the app.
Describes available options from the app's main screen.
Explains how to adjust temperature using the app.
Guides on setting the time of day through the application.
Details setting one or two filter cycles, start times, and durations.
Explains how to control jets, blowers, and lights via the app.
Lists the time-out periods for pumps, blower, and lights.
Explains common error messages and corrective actions.
Defines other messages displayed on the LCD.
Explains the criticality of water balance and chemical management.
Details methods and importance of sanitizing.
Discusses maintaining the correct pH balance.
Highlights benefits of ozone/UV systems.
Provides recommendations for using ozone for sanitization.
Explains that specialty chemicals are still needed with ozone/UV.
Details how to use the external drain valve.
Explains how to use internal drain hoses.
Provides step-by-step instructions for cleaning the filter cartridge.
Suggests annual filter replacement for optimal performance.
Outlines steps to prepare the spa for winter to prevent freezing.
Provides instructions for cleaning the spa's exterior.
Details how to clean the spa's acrylic shell and avoid damage.
Explains the procedure for changing the light bulb.
Addresses causes like poor filtration and solutions.
Discusses causes like organics and solutions.
Explains causes like high chloramines and solutions.
Addresses low pH and its effects.
Addresses bacterial/algae growth and shock treatment.
Discusses body oils/detergents and skimming/refilling.
Covers pH imbalance and low chlorine/bromine.
Addresses low pH and insufficient sanitizer.
Discusses unsanitary water and chemical balance.
Covers high calcium/alkalinity and scale removal.
Addresses high sanitizer levels and old indicator dye.
Explains causes like organics, high temp, and low pH.
Addresses tripped breakers and lack of power.
Covers low water level and heater mode selection.
Discusses clogged filters, water chemistry, and maintenance.
Addresses evaporation and high ambient temperatures.
Covers filter clogging, dirty filters, and closed valves.
Discusses clogged suction and worn motor bearings.
Covers unprimed pumps and closed valves.
Addresses checking unions and drain hoses.
Covers air control and jet nozzle issues.
Addresses tripped breakers and thermal overload.
Explains this is due to brush wear.
Covers checking temperature settings and modes.
Lists conditions requiring doctor consultation before spa use.
Emphasizes checking water clarity and showering.
Provides guidelines for safe entry, exit, duration, and usage.
Warns against alcohol, drug use, and unsupervised use.
Details the wiring and DIP switch settings for a specific setup.
Explains the function of DIP switches and the switchbank.
Shows how buttons map to system functions.
Identifies wire colors and connector types.
Details wiring and DIP settings for Setup 4.
Explains compatibility and DIP switch settings for VS50x systems.
Shows the wiring diagram for the standard digital panel.
Details how to set amperage using dip switches.
Shows the physical setup and wiring diagram for MXBP20.
Shows the physical setup and wiring diagram for MXBP501.
Instructions for installing and reviewing the safety sign.
Outlines what the warranty covers and how to get service.
Includes a disclaimer about information accuracy and specifications.
Provides fields for recording purchase and installation details.
General
