To Next PageTo Next Page
Need help?Do you have a question about the MAAX MXBP501 and is the answer not in the manual?
General| Model | MXBP501 |
|---|---|
| Category | Hot Tub |
| Number of Jets | 50 |
| Voltage | 240V |
| Seating Capacity | 5 |
| Dimensions | 84 x 84 x 36 inches |
| Pump | 2 x 5HP |
| Shell Material | Acrylic |
| Cabinet Material | Synthetic Wood |
Explains the causes, symptoms, and effects of hyperthermia, including risks during pregnancy and heat exposure.
Factors to consider for outdoor spa installation, including codes, fencing, sunlight, and site access.
Factors for indoor spa installation, focusing on humidity control, floor drainage, and material suitability.
Details on Directional, Rotating, and Euro jets, and how to adjust them for optimal hydro-massage.
Procedure for cleaning and replacing spa jets to prevent mineral buildup and ensure free movement.
Critical safety instructions, GFCI requirements, and installation options for spa electrical connections.
Explains the GFCI requirement and its role in spa safety installations.
Details on how to connect the spa's electrical supply, including voltage and wiring requirements.
Steps for preparing and filling the spa with water, opening valves before filling.
Detailed instructions on how to prime spa pumps during filling and exit the priming mode.
Clarification that 'Pr' on display indicates Priming Mode, not an error, and its function.
Introduction to the 300 control panel, its features, and the function of user pads.
How to manage temperature, pumps, and operating modes on the 300 control panel.
Setting up preset and custom filter cycles for optimal spa cleaning and maintenance.
How to operate the spa's internal lighting system and its automatic shut-off feature.
Introduction to the 501 control panel, its features, and the function of user pads.
How to adjust temperature, switch modes, and use user pads on the 501 control panel.
How to activate jets and pumps on the 501 control panel, including speed settings and time-outs.
Setting and adjusting spa filtration cycles for optimal water quality and system efficiency.
Introduction to the 504 control panel, its features, and user interface buttons.
How to adjust temperature, modes, and control jet pumps using the 504 control panel.
Setting start times and durations for spa filter cycles, including optional clean-up cycles.
Guidelines for safely connecting portable electronic devices to the spa's stereo system.
Introduction to the TP600 control panel, its buttons, and navigation structure.
How to navigate the TP600 control panel menus using dedicated buttons.
Steps for preparing and filling the spa with water, opening valves before filling.
Detailed instructions on how to prime spa pumps during filling and exit the priming mode.
Explains circulation pump modes, filtration processes, and ozone usage for water quality.
How to adjust set temperature, use press-and-hold, and configure dual temperature ranges.
Explains Ready and Rest modes for heating and circulation, and the Ready-in-Rest mode.
How to set the time-of-day, its importance for cycles, and how to invert the display.
How to restrict or unlock spa controls and settings to prevent unauthorized use or adjustments.
Steps to adjust filtration cycle start times and durations for optimal spa operation.
Introduction to the TP800 control panel, its buttons, and navigation structure.
How to navigate the TP800 control panel menus using dedicated buttons.
Describes the main screen display, spa status indicators, and available information.
How to access and control all spa equipment and features through the TP800 panel.
Explains the shortcut screen, programming features, and dual temperature range settings.
Details on Ready vs. Rest heat modes and circulation mode for spa operation.
Describes the Ready-in-Rest mode and how it activates when jets are pressed in Rest Mode.
Detailed steps for filling the spa, entering priming mode, and priming the pumps.
Explains pump functions, speeds, time-outs, and automatic activation during heating/filtering.
Details on filtration cycles, ozone use, and automatic freeze protection measures.
Diagnosing and resolving common hardware problems with the spa system, heater, and water flow.
Solutions for pump/motor noise, water leakage, and spa operation problems.
Important guidelines for spa users, including health considerations and safety precautions.
Visual representation of the 300 series spa system's wiring configuration and DIP switch settings.
Visual representation of the 501 series spa system's wiring configuration and DIP switch settings.
Wiring diagram for the 504 series system, including panel settings and amperage configuration.
Wiring diagram and hardware setup for the MXBP20 series spa control system.
Wiring diagram and hardware setup for the MXBP501 series spa control system.
Guidance on permanently installing the safety sign for user awareness.
Overview of the limited warranty provided by MAAX Spas Industries Corp. for spa components.
Legal information regarding copyright, reproduction, and disclaimer for the manual.
Space for recording spa purchase details, serial number, and installation information.
Blank space provided for user notes and additional information.
