To Next PageTo Next Page
Need help?Do you have a question about the MAAX MXBP20 and is the answer not in the manual?
Discusses symptoms and effects of hyperthermia and related warnings.
Guidance on selecting a suitable and accessible location for the spa.
Considerations for installing a spa in an outdoor environment.
Considerations for installing a spa in an indoor environment.
Details on different types of spa jets and how to clean or replace them.
Explanation of how to adjust jet intensity using air controls and related valves.
Crucial safety guidelines for spa electrical connections and installation.
Information on how to connect the spa's electrical supply based on model.
Requirement for GFCI protection and its connection for spa safety.
Guides on bleeding air from the system after filling or refilling the spa.
Explains the function of buttons on the 300 Control Panel for spa operation.
How to adjust and monitor spa water temperature settings.
Details on Standard, Economy, and Sleep modes for spa operation.
Instructions for setting spa time and configuring filtration cycle duration and start times.
Explanation of buttons on the 501 Control Panel for spa functions.
Activating primary and therapy pumps for jet action and massage levels.
Description of the three primary operating modes for spa temperature control.
Identifies and explains the touch pads on the 504 Control Panel for spa functions.
How to adjust and set the spa's water temperature.
Details the Standard, Economy, and Sleep modes for spa temperature regulation.
Information on setting and managing spa filtration cycles for optimal performance.
Overview of the primary menu structure and navigation buttons.
Instructions on how to navigate through the TP600 control panel menus.
Steps for preparing and filling the spa with water.
Explains the spa's priming mode for system initialization.
Detailed instructions for priming the spa pumps to ensure proper operation.
Information on pump operation, speeds, and automatic time-outs.
How filtration and ozone systems work together for water quality.
Automatic activation of spa devices to protect against freezing temperatures.
Instructions for activating the jet sequencing system.
How to select and change programs for the therapy sequencer.
How to adjust the speed of the therapy sequencing programs.
How to pause and resume the therapy sequencing operation.
Overview of connecting the spa to smart devices via WiFi.
Steps to download and find the spa control application.
Procedure for connecting the smart device application to the spa.
Steps to connect the spa to your home WiFi network for remote control.
Available options within the spa control application interface.
How to configure temperature, units, heat mode, and ranges in the app.
Configuring one or two filter cycles, including start times and durations via the app.
Explanation of automatic time-out features for pumps and lights.
Table of common LCD messages, their causes, and corrective actions.
Defines various messages displayed on the spa's LCD screen and their meanings.
Importance of maintaining proper water chemistry for spa health and equipment.
Methods and importance of sanitizing spa water to destroy organisms.
Maintaining proper pH balance for sanitizer effectiveness and equipment protection.
Guidelines for using ozone as a spa sanitizing agent.
Instructions for properly draining the spa water using external and internal drains.
Procedures for cleaning and replacing the spa's filter cartridge.
Steps to prepare the spa for cold weather to prevent freezing damage.
How to clean and maintain the spa's cabinet exterior.
Guidance on cleaning the acrylic spa shell surface.
Identifies causes and solutions for cloudy spa water.
Addresses causes and solutions for unpleasant odors in spa water.
Causes and solutions for musty odors in spa water.
Addresses causes and solutions for foam and scum buildup in the spa.
Causes and solutions for algae growth in spa water.
Potential causes and solutions for eye irritation when using the spa.
Causes and solutions for scale buildup in spa water and equipment.
Troubleshooting steps when the spa system is not functioning.
Diagnosing and resolving issues with the spa heater.
Causes and solutions for unclean spa water related to hardware.
Troubleshooting reasons for lack of water flow from spa jets.
Steps to diagnose why the spa motor might not be operating.
Details on wiring configuration and DIP switch settings for the 300 Series.
Specific wiring setup for the 300 Series as manufactured.
Information on wiring configuration and DIP switch settings for the 501 Series.
Specific wiring setup for the 501 Series as manufactured.
Overview of the hardware setup for the MXBP20 system.
Visual representation of the MXBP20 Series system wiring.
Overview of the hardware setup for the MXBP501 system.
Visual representation of the MXBP501 Series system wiring.
General
