EasyManua.ls Logo

mabe MMI12CDMCCM9 - Special Modes & Functions

mabe MMI12CDMCCM9
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Pi
emergency operation
Use this operation only when the remote control is defective or
lost, and with function of Emergency running air conditioner can
run automatically for a while.
When the emergency operation switch is pressed, a "Pi" sound is
heard once, which means the start of this operation.
Room
temperature
Operation
mode
Designated
temperature
TIMER mode Fan Speed
Above
22,8 °C
COOLING26,2 °C No AUTOMATIC
test operation
Test operation switch is the same as emergency switch.
Use this switch in the test operation when the room temperature
is below 16 °C, do not use it in the normal operation.
Continue to press the test operation switch for more than 5 sec-
onds. After you hear two "Beeps", release your finger from the
switch: the cooling operation starts with the air flow speed at
"Hi".
Beep Beep
Under this operation mode, the fan motor of the indoor unit will
run at HIGH speed.
It is not possible to change the temperature setting or fan speed
setting. It is also not possible to operate the TIMER or the DRY
mode.
When POWER switch is turned on for the first time and emergency
operation starts, the unit will run automatically in the following
mode:

Other manuals for mabe MMI12CDMCCM9

Related product manuals