mabe RMT1540X - Cold Level Function; Ice Factory; Lock Function

90
lock function:
This function can block the LCD control, stopping anyone
else from changing your programme.
To activate and deactivate, press the Alarm and Holidays
buttons simultaneously for 3 seconds.
You’ll know that the function has been activated as the
Lock animation will begin, where it will remain until the
function has been deactivated. Thus, all other functions
will be blocked.
cold level function:
This function establishes the temperature level
of your refrigerator on a scale of 1 (least cold)
to 9 (coldest)
ice factory
Some models come with this ice system, which is found inside the freezer on
the upper left-hand part.
how to start
Your system is divided into two parts; the cassette
where the ice-trays are kept and the box where ice is
deposited after being released
First, place your thumb and index nger between 1.
the system’s knobs, and pull towards you until the
cassette comes completely out.
Once you’ve removed the cassette, place it on a at 2.
surface and ll the trays with puried water up to
the point where the water merges. Avoid overlling
the trays as doing so will make the ice more dicult
to remove.
Place back the cassette, aligning its side tabs with 3.
the support slides of the release and push until it’s
completely in place. Make sure it’s in a horizontal
position to avoid spilling water.