62
where to start?
choosing a location
Choose a place for your refrigerator. We recommend a large space that can be
kept clean and dry to prevent oxidation.
positioning
To ensure that the refrigerator works correctly, it’s important that air can circulate.
We recommend the following minimum surrounding distances:
10 cm on both sides, 10 cm at the back, between 5 t
and 10 cm on top.
Don’t position it near heat-generating appliances t
such as hobs, heaters, or in areas exposed to
sunlight. This could overwork the refrigerator,
making it less ecient and increasing energy
consumption.
Don’t lean it against a wall.t
Observing these distances and recommendations
will guarantee you a fully-functioning product, as it
will prevent the components from direct contact with
walls and furniture, thus avoiding unpleasant sounds.
installation
You must remove all packaging including:
tape, cardboard, plastic, and/or Styrofoam (EPS).
The refrigerator must not be connected to an
energy source before installation.
important
Let the refrigerator stand for 6 to 8 hours before
connecting it to allow the cooling gas and the
compressor oil to settle.
To p
Base
Corner
packaging
model
ingenious ingenious prismatic prismático glass glass
Capacity 400 litres 510 litres 400 litres 510 litres 400 litres 510 litres
Total Dimensions
(closed doors)
cm cm cm cm cm cm
Depth 69.32 70.28 76.02 78.18 76.58 78.16
Width 66.22 74.37 66.22 74.37 66.22 73.91
Total Dimensions
(open doors)
Depth 125.85 138.80 126.07 138.83 125.70 138.61
Width
107.06 120.35 111.14 124.51 111.64 124.42
working width
door opening direction
working depth
To Next Page
Loading...
