AC
Applications
Before connecting
an
appliance or power cord
to
the generator;
• Make sure that
it
is
in
good working order. Faulty appliances or power cords
can
create a potential for electrical shock.
• If
an
appliance begins
to
operate abnormally, becomes sluggish or stops suddenly, turn
it
off immediately. Disconnect the applicance, and
determine whether the
problem
is
the appliance, or if the rated load capacity ol the generator has been exceeded.
• Make sure that the electrical rating ol the tool or appliance does not exceed that of the generator, Never exceed the maximum power rating of
the generator.
Power levels between rated and maximum may be used for
no
more than 5 minutes.
I NOTICE I Substantial overloading
wm
open the
circuit
breaker. Exceeding
U1e
!ime
limit
for
maximum
power
operation
or
siigMly
overloading
the
generator
may
no!
switch
thii'
circuil
breaker
OFF,
but
will
shorten
the
service
iiie
of
the generator.
Limit operation requiring maximum power
to
5 minutes.
Maximum power is:
See specifications. (Pages 33&34)
For continuous operation, do not exceed the rated power.
Rated power is:
See specifications. (Pages 33&34)
In
either case, the total power requirements
(VA)
of all appliances connected must be considered. Appliance and power tool manufactures
usually_list rating information near the model number or serial number.
14
To Next Page
Loading...
