STARTING THE
1.
Make sure
to
disconnect
all
electrical loads from panel receptacles. The generator may be hard
to
start
if
a load is connected.
2.
Turn
the fuel valve to the
ON
position.
3.
The automatic choke will
be
closed if the engine
is
cold. If you want to operate the choke manually, move the choke rod out of the CLOSED
position.
4.
Start the engine
With
recoil starter:
Turn
the engine switch
to
the
ON
position.
Pull the starter grip lightly until resistance is felt, then pull briskly.
I NOTICE I Do
not
allow
the starter
grip
to
snap back against the engine.
Return
ii
gently
to
prevent damage
lo
the
starter
or
housing.
5.
If
you
have manually closed the choke, move it to the OPEN position
as
the engine warms
up.
21
To Next Page
Loading...
