Mac allister MBC3630 - Page 34

EN
34
In
more
detail...
MBC3630
by MacAllister
Operation
Cutting
2.Holdtheproductrmlysothatitsits
with a gap between the product and
your right side.
3. Stand upright, do not lean forward
and pay attention to posture. Keep
both feet apart to help retain your
balance.
4. Never hold the cutting head higher
than your hip (Fig. 21), the higher you
hold the cutting head will increase
the risk of objects being thrown.
max.
Fig. 21
Fig. 22 Fig. 23
5. Carefully plunge the blade from above when cutting long undergrowth.
Trimming
1. Attach the trimmer head (18) to cut to cut smaller types of weed, lawn grass
or similar soft vegetation. Make sure that the guard (17) has been attached
properly.
2.Holdtheproductrmlywithagapbetweentheproductandyourrightside.
3. Stand upright, do not lean forward and pay attention to posture. Keep both
feet apart to help retain your balance.
4. Hold the trimmer head (18) just above the ground at an angle of approximately
30° (Fig. 22).
5. Move the product with a slow regular arc from left to right before moving it
back to the starting position before trimming the next area (Fig. 23).
max.
Fig. 21
Fig. 22 Fig. 23