Mac allister MLM1334 - Page 22

EN
22
In
more
detail...
MLM1334
by MacAllister
6b
16
6a
5
6
6
6a
7
2.
1.
1.
3.
2.
Fig 11
11
10
3.
1.
2.
Fig. 12
Cutting height adjustment
Adjust the cutting height according to the needs of your lawn. The cutting height
depends on the kind of lawn and its actual height. When mowing high grass, start
with the maximum cutting height and make a second cut with a lower cutting
height.
1. Pull the lever (11) towards the rear wheel (10) (Fig. 12, step 1).
2. Move forward or backward to adjust the cutting height (Fig. 12, step 2).
3. Release the lever (11) and ensure it engaged in the slot properly (Fig. 12,
step 3).
WARNING!
Make sure the clamp levers (6) are properly tightened
before using the product.
WARNING!
Ensure that the lever (11) engages in the slot after each
adjustment.
WARNING!
Switch the product off and wait that the cutting blade had
come to a complete stop before adjusting the cutting height!
Disconnect the plug from the power supply before adjusting the
cutting height!
Product functions