EN
26
In
more
detail...
MLM1334
by MacAllister
After use
The golden rules for care
General Cleaning
1. Switch the product off, disconnect the plug from the power supply and let it
cool down.
2. Check, clean and store the product as described below.
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you nd broken and worn parts.
1. Clean the product with a dry cloth. Use a brush for areas that are hard to
reach.
2. Remove stubborn dust with high pressure air (max. 3 bar).
WARNING!
If the product strikes a foreign object stop immediately! Let
the product cool down and thoroughly inspect the product for damage!
Have any damage repaired before restarting!
Extensive vibration of the product during operation is an indication of
damage! The product should be promptly inspected and repaired!
WARNING!
Always switch the product off, disconnect the plug from
the power supply. Let the product cool down before performing
inspection, maintenance and cleaning work!
WARNING!
Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualied
specialist!
Operation / Care and maintenance
To Next Page
Loading...
