Mac allister MLM1737 - Cutting Height Adjustment; Grass Catcher Operation and Emptying

EN
22
In
more
detail...
MLM1737
by MacAllister
Cutting height adjustment
Grass catcher
Adjust the cutting height according to the needs of your lawn. The cutting height
depends on the kind of lawn and its actual height. When mowing high grass, start
with the maximum cutting height and make a second cut with a lower cutting
height.
1. Pull the lever (11) towards the rear
wheel (10) (Fig. 12, step 1).
2. Move forward or backward to adjust
the cutting height (Fig. 12, step 2).
3. Release the lever (11) and ensure it
engaged in the slot properly (Fig. 12,
step 3).
WARNING!
Ensure that the lever (11) engages in the slot after each
adjustment.
WARNING!
Switch the product off and wait that the cutting blade had
come to a complete stop before adjusting the cutting height!
Disconnect the plug from the power supply before adjusting the
cutting height!
WARNING!
Do not attempt to use the product without the grass
catcher attached when collecting grass – danger of ying objects!
Switch the motor off and wait that the blade had come to a complete
stop before removing the grass catcher!
Attach the grass catcher (8). Always carry the grass catcher (8) by its carry
handle (8a).
Indicator
The grass catcher (8) is equipped with a hatch (8e) that indicates the lling during
operation.
Product functions
10
11
1.
2.
3.
Fig. 12