MAC TOOLS MPH1911 - User Manual

Long Barrel .401" Shank Air Hammer
Short Barrel .401" Shank Air Hammer
MPH1911
MPH1931
Operation and
Maintenance Manual
© 2017 Mac Tools
To reduce the risk of injury, read and
understand these safety warnings and
instructions before using the tool.
Keep these instructions with the tool
for future reference. If you have any
questions, contact your MAC TOOLS
representative or distributor.
WARNING

Summary

Introduction

General Safety Instructions

Work Area Safety

Guidelines for maintaining a safe and clean work environment.

Personal Safety

Precautions for operator alertness, posture, and avoiding distractions.

Power Tool Use and Care

Service

Additional Specific Safety Rules for Air Hammers

Specific safety precautions and tips for operating air hammers.

Proper Hand Position

Maintenance

Lubrication

Daily lubrication requirements and procedure for air tools.

Storage

Proper lubrication before storing the air tool.

Chisel Assembly

Specifications

Limited Warranty

MAC TOOLS MPH1911 Specifications

General

Model	MPH1911
Type	Air Hammer
Air Inlet Size	1/4" NPT
Hose Size	3/8"
Blows Per Minute	2200 BPM
Average Air Consumption	4 CFM