MacAllister MWDV20L - Technical Specifications and Components; Technical Specifications; Included Accessories; Product Component Identification

20L 1100W WET/DRY VACUUM CLEANER
EN
1
8
6
7
9
2
4
5
10
3
European directive 2012/19/EU. It will then be recycled or dismantled in order to reduce the
impact on the environment; electrical and electronic equipment are potentially dangerous to the
environment and the health of human beings due to the presence of dangerous substances. For
further information, you can contact your local or regional government.
Technical data
Power ......................................................................................................................................1100W
Supply Voltage ....................................................................................................220-240V~50/60Hz
Protection .................................................................................................................................. IPX4
Tank capacity .......................................................................................................................20 Litres
Tank construction material .........................................................................................Stainless Steel
Vacuum Pressure (kPa) .................................................................................................................20
Weight (kg) ...................................................................................................................................7,2
This tool is double insulated. There are two independent barriers of insulation to protect you from
the possibility of electric shock.
ACCESSORIES
The vacuum cleaner is supplied with the following accessories:
1 Hose
3 Plastic extension tubes
1 Crevice tool
1 Master nozzle
1 Foam sleeve (Fitted on Tool – For wet use only)
1 Dust collection bag (for dry cleaning only)
1 Cartridge lter
DESCRIPTION
6
Getting started
WARNING: Always ensure that the plug is disconnected from power source, the tool is switched
off before making any adjustments or maintenance procedures. Install the appropriate lter before
placing the motor assembly back on the tank. For more information on installing your lters, refer
to Operation. Remove the vacuum cleaner and all of the accessories from the packaging. Open
the locking clamps with your thumbs and remove the motor assembly from the tank. Then, remove
the accessories from the tank. With the electric cord disconnected from the outlet, and the motor
1. On/Off switch
2. Carrying handle
3. Vacuum port
4. Tank carrying handle
5. Castor foot
6. Castor
7. Tank locking clamp
8. Power cord storage
9. Vacuum cleaner tank
10. Motor Assembly