Need help?Do you have a question about the MacDon 9250 and is the answer not in the manual?
Indicates important safety messages in this manual and on safety signs.
Defines DANGER, WARNING, and CAUTION signal words for hazard communication.
Details location and importance of safety signs on the windrower.
Provides general farm safety precautions for machinery operation.
Provides key dimensions and weight specifications for the tractor.
Details specifications for the diesel engine, including bore, stroke, and oil pressure.
Lists torque values for English and Metric bolts and capscrews.
Explains symbols used for instruments and controls on the windrower.
Details the LCD display functions, warning lights, and programming modes.
Describes the operation of the ground speed lever, speed range, throttle, and park brake.
Explains the operation of header drive, reel, conveyor speed, and deck shift controls.
Covers adjustments for operator weight, seat height, back angle, and arm rests.
Details features like cup holders, cigarette lighter, and auxiliary power points.
Outlines the operator's duties regarding manual understanding and machine safety.
Specifies checks and procedures for the first 100 hours of engine and windrower operation.
Details daily pre-operation checks for safety and machine readiness.
Provides step-by-step instructions for safely starting the windrower engine.
Explains safe operation and handling procedures for driving the windrower.
Details the correct steps for stopping the windrower and its engine safely.
Provides instructions for connecting the header to the windrower tractor.
Covers safe procedures for transporting the windrower on roads or trailers.
Outlines steps for proper storage of the windrower at the end of the season.
General safety precautions before servicing the machine or opening drive covers.
Details recommended fuels, lubricants, and system capacities for the windrower.
Provides a schedule and procedure for greasing various points on the tractor.
Covers engine access, cleaning, and barring tool usage.
Details fuel system maintenance, including storage, refuelling, and filter service.
Covers coolant level checks, radiator cap, and changing coolant procedures.
Provides information on battery maintenance, charging, and preventing electrical damage.
Covers hydraulic system safety, oil levels, and component maintenance.
Details lubricant requirements and belt maintenance for the header drive.
Outlines checks and adjustments for neutral lock and steering control systems.
Covers power wheel lubrication, tire inflation, and bolt torque specifications.
Details maintenance for the cab air conditioning and filter systems.
Provides a schedule for periodic maintenance based on operating hours.
Troubleshooting for blower fan issues, heating, and air conditioning problems.
Addresses issues like hard starting, knocking, and oil pressure problems.
Diagnoses problems with low voltage, battery charging, and dim lights.
Troubleshoots issues with pulling ability, brakes, and warning alarms.
Addresses problems with header or reel lifting, power, and turning.
Covers troubleshooting for sickle drive engagement and belt issues.
Details the automatic screen cleaning device attachment.
Describes adding weight to the tractor frame for stability.
Explains the module that allows momentary activation of header height control.
Provides information on optional formed tail-wheel caster attachments.
Details the hydraulic components for in-cab reel fore-aft position adjustment.
Explains the hydraulic cylinder for in-cab header tilt adjustment.
Safety precautions and steps before starting the unloading process.
Instructions for unloading the windrower using two forklifts.
Instructions for unloading the windrower using a single forklift.
Provides step-by-step instructions for installing drive and caster tires.
Details battery recommendations, filling, charging, and installation procedures.
Instructions for preparing the tractor for specific Harvest Header models.
Provides guidance for installing a radio in the machine's console.
Instructions for mounting the antenna and routing cables for a two-way radio.
To Next Page
General