Need help?Do you have a question about the MacDon 9350 and is the answer not in the manual?
Explains safety alert symbol and signal words (DANGER, WARNING, CAUTION).
Location and importance of safety signs on the windrower.
General safety precautions for all types of machinery.
Detailed dimensions and weight specifications for the windrower tractor.
Tire sizes, inflation pressures, and hydraulic specifications.
Guidelines for tightening bolts and capscrews using torque values.
Explains symbols used on instruments and controls.
Details on the LCD display, functions, and programming of the Mac-Monitor.
Explains fuel, volt, and engine temperature gauges and speedometer.
Operation of ignition switch, light switch, and turn signals.
Controls for blower, air conditioning, and heater systems.
Operation of ground speed, speed range, throttle, and park brake controls.
Operation of header drive, conveyor speed, reel speed, and deck shift.
How to adjust operator seat for height, back angle, and position.
Features like cup holder, cigarette lighter, and auxiliary power points.
Key duties and responsibilities for safe and proper windrower operation.
Procedures for engine and windrower break-in during the first 100 hours.
Annual checks required before starting the operating season.
Daily checks to perform before starting the engine each day.
Steps for safely starting the windrower engine and adjusting controls.
Instructions for driving the windrower forward, rearward, and making turns.
Steps for safely stopping the windrower and its engine.
Procedures for safely exiting the operator's seat and securing the machine.
Step-by-step guide for connecting and disconnecting the header.
Guidance on adding rear weight for machine stability with different headers.
Instructions for header operation, angle, levelling, and flotation adjustments.
Safety precautions and procedures for transporting the windrower on roads.
Instructions and precautions for towing the windrower on a trailer or without a trailer.
Steps for properly storing the windrower at the end of the operating season.
General safety precautions and procedures before performing maintenance.
Recommended fuels, fluids, and lubricants for the windrower.
Points and intervals for greasing the windrower tractor components.
Maintenance of the engine, belts, air intake, fuel, exhaust, and cooling systems.
Safety, battery, lights, and circuit breaker maintenance procedures.
Safety, oil, filters, and lift/drive hydraulic system maintenance.
Maintenance of hydraulics, neutral lock, steering, wheels, and park brake.
Safety precautions and maintenance for the air conditioning system.
Schedule of periodic maintenance procedures organized by service intervals.
Common problems and solutions for the cab air conditioning system.
Troubleshooting issues related to engine starting, running, and performance.
Diagnosing and resolving problems with the traction drive system.
Solutions for issues with header and reel lifting and power.
Troubleshooting problems related to sickle drive and belt engagement.
Issues related to brake capacity, release, and seat ride quality.
Description of the automatic air intake screen cleaning attachment.
Details on adding rear weight packages for stability.
Information on the header express-down option for faster lowering.
Description of formed tail-wheel caster options for specific tractor models.
Attachments for adjusting reel fore-aft position and header tilt angle from cab.
Kit to modify linkage for shallower header angle in rocky conditions.
Safety and preparation steps before unloading the windrower.
Procedure for unloading the windrower using two forklifts.
Procedure for unloading the windrower using a single forklift.
Step-by-step instructions for installing drive tires and setting tire pressure.
Recommendations and instructions for installing and connecting the battery.
Information on opening the shut-off valve for the cab heater circuit.
Instructions for preparing the tractor and specific headers for attachment.
Guide for installing radios and routing cables.
Instructions for attaching the tool box and swath roller.
To Next Page
General