Need help?Do you have a question about the MacDon 9352 and is the answer not in the manual?
Explains the meaning and importance of the safety alert symbol.
Defines DANGER, WARNING, and CAUTION signal words for safety messages.
Lists and describes various safety signs found on the windrower.
Provides detailed physical dimensions and weight of the tractor.
Details transmission type, displacement, fluid, and final drive ratios.
Specifies tire models and their corresponding inflation pressures for various headers.
Provides specifications for the diesel engine, including type, displacement, and performance data.
Lists torque values for English and Metric bolts and capscrews.
Explains symbols used for instruments and controls on the operator's station.
Describes the LCD display, its functions, and programming modes.
Details the function and readings of the fuel, volt, and engine temperature gauges.
Describes the three positions of the ignition switch: OFF, RUN, and START.
Explains the four positions of the light switch for different operating conditions.
Details controls for blower speed, air conditioning, and heater temperature.
Explains the variable ground speed control lever and speed-range control.
Describes switches for header drive, conveyor speed, reel speed, and deck shift.
Provides instructions for inspecting, maintaining, and using seat belts.
Details adjustments for operator weight, seat height, back angle, and fore-aft position.
Outlines the owner/operator's responsibilities for safe and proper machine use.
Details engine and windrower break-in procedures and checks for the first 100 hours.
Lists annual maintenance checks to be performed at the start of each operating season.
Lists daily checks to be performed before starting the engine.
Provides a step-by-step guide for starting the windrower engine safely.
Explains safe operation and handling of the windrower, including hydrostatic steering.
Details the procedure for driving the windrower forward, including speed and steering controls.
Details the procedure for driving the windrower in reverse, noting steering differences.
Provides instructions for stopping the windrower and its engine safely.
Outlines steps to safely leave the operator's seat and the windrower.
Provides a step-by-step guide for attaching the header to the windrower tractor.
Explains how to determine and add rear weight for machine stability based on header and conditions.
Provides instructions for safely detaching the header from the windrower tractor.
Details correct header operation for crop loss reduction and service life.
Describes how to adjust header angle using mechanical or hydraulic means for optimal cutting.
Provides instructions for adjusting header levelling using shims for a level cut.
Explains how to adjust header float settings for different conditions and header weights.
Details procedures and precautions for transporting the windrower on roads.
Provides instructions and safety precautions for towing the windrower on a trailer.
Outlines precautions for towing the windrower without a trailer in emergency situations.
Lists steps for properly storing the windrower at the end of the operating season.
General safety precautions and procedures to follow before servicing the machine.
Recommends specific fuels, fluids, and lubricants for the windrower and engine.
Details the procedure and points for greasing the windrower tractor at specified intervals.
Details procedures for checking and changing engine lubricating oil and filter.
Details air cleaner operation, cleaning, and inspection of filter elements.
Covers fuel storage, safe refuelling practices, and tank capacity.
Details the daily procedure for draining water and sediment from the fuel/water separator.
Provides instructions for changing diesel engine fuel filters.
Covers checking and maintaining engine coolant level and radiator cap.
Provides instructions for changing engine coolant, including flushing and refilling.
Explains battery safety precautions and handling.
Explains how to prevent alternator and regulator damage.
Covers adjusting headlights and servicing light bulbs.
Covers safety precautions for high-pressure hydraulic fluids and system maintenance.
Details how to check and adjust cylinder control valve relief pressure for header and reel lift.
Explains the flow control block and how to adjust header drive relief pressure.
Details how to check and change bevel gear box lubricant.
Explains the header drive belt system and how to remove the belt.
Covers pulley alignment for the header drive belt to prevent belt failure.
Covers transmission oil pressure warnings and how to check charge pump pressure.
Details checks for the neutral lock and steering system, including safety precautions.
Provides troubleshooting steps for issues with neutral lock and steering controls.
Details the procedure to eliminate machine movement in neutral and improve locking.
Covers checking lubricant levels and capacities for power wheels.
Details park brake adjustment procedures for specific tractor models.
Covers safety warnings and procedures for servicing the air conditioning system.
Lists periodic maintenance procedures organized by service intervals (hours of operation).
Details maintenance tasks for 10, 50, and 100-hour intervals.
Lists maintenance tasks for 200, 300, 500, 1000, and 2000-hour intervals.
Lists symptoms, problems, and solutions for common issues with the cab air system.
Addresses problems related to insufficient cooling and their potential causes and solutions.
Explains causes of excessive noise in the air conditioning system and their remedies.
Lists problems and solutions for engine starting issues and knocking.
Continues engine troubleshooting, covering low oil pressure and high oil consumption.
Addresses engine running irregularly, lack of power, and temperature issues.
Troubleshoots warning alarms, engine overheating, and high fuel consumption.
Troubleshoots low voltage, battery charging, and dim lights issues.
Addresses issues with traction drive alarms, oil pressure, and pulling ability.
Troubleshoots steering alignment, neutral position movement, and road speed.
Lists problems and solutions related to header and reel lifting and power.
Addresses issues with sickle drive engagement, belt tension, and belt vibration.
Troubleshoots brake capacity and release issues, including oil contamination.
Addresses ride comfort issues related to seat suspension and tire pressure.
Describes an optional attachment for automatic air intake screen cleaning.
Explains optional rear weight packages for improving tractor stability.
Describes an optional module for in-cab adjustment of reel fore-aft position.
Outlines safety precautions and steps before unloading the windrower.
Details the procedure for unloading the windrower using two forklifts.
Details the procedure for unloading the windrower using a single forklift.
Provides instructions for installing rear tires on XX50/XX40 tractors, including caster installation.
Provides instructions for installing rear tires on 9352/4952/2952/8152 tractors, including caster installation.
Covers battery recommendations, filling, and charging procedures.
Details the procedure for installing and connecting the battery and its cables.
Explains the cab heater shut-off valve and when to open it for heating.
Lists final checks and adjustments to ensure the machine is field-ready.
Details preparing the tractor for specific header models, including switch installation.
Provides instructions for attaching lift linkage supports and connector shafts for specific headers.
Details attaching lift linkage supports and wear plates for specific header sizes.
Provides instructions for installing a radio into the console and connecting its wiring.
Details mounting the antenna and routing cables for a two-way radio installation.
Instructions for hanging the tool box on the frame bracket.
Explains how to attach a swath roller hitch or install a direct-mounted swath roller.
To Next Page
General